Skip to content

The eco benefits of external wall insulation

External wall insulation cuts the heat a solid-walled home loses through its walls, so the house needs less fuel to stay warm. Here's how it works, what it's made of, and which material suits which house.

Around a third

of heat lost from an uninsulated home escapes through the walls

One layer

wrapped round the whole outside of the house

Less fuel

needed to heat the house, winter after winter

Three materials

wood fibre, mineral wool or EPS, each with a different footprint

Heat loss figure from the Energy Saving Trust

Is external wall insulation good for the environment?

Yes, for most solid-walled homes. Heating our homes is a significant source of the UK's carbon emissions, and around a third of the heat lost from an uninsulated home escapes through the walls. External wall insulation reduces that heat loss, so the house needs less heating and burns less fuel for as long as the system is on the wall.

It works because the insulation goes round the outside of the building in one continuous layer, then sits behind a weatherproof render. When it's properly detailed, that helps reduce thermal bridging and condensation risk, and the walls stay warmer instead of losing heat to the weather.

And unlike a lot of eco improvements, there's nothing to remember to switch on. Once it's on, the house needs less heating, so the heating system works less and emissions should come down. For how it goes on, see our external wall insulation page.

Energy efficiency

How external wall insulation cuts a home's carbon footprint

  1. The wrap goes onInsulation boards are fixed to the outside of your walls, then sealed behind a weatherproof render. One continuous layer, whole house.
  2. Heat stays inThe walls lose heat more slowly, so rooms stay warmer for longer once the heating goes off.
  3. The boiler eases offShorter heating cycles, fewer of them. Less energy used to keep the house at the same temperature as before.
  4. It keeps workingIt does the same job every winter it's on the wall, with nothing more than basic upkeep.

Eco-friendly insulation

EPS, mineral wool or wood fibre

Stores carbon

Wood fibre

Made from wood, so it locks up carbon the tree absorbed while it grew. It's vapour-open, which suits a lot of older stone and cob walls in Devon, and it's finished with a compatible breathable render. It costs more, and it's worth it on the right house.

Non-combustible

Mineral wool

Spun from rock. It's vapour-open, non-combustible, and can be recycled at the end of its life. A sound middle ground for many homes, especially where fire performance or moisture matter but the budget won't stretch to wood fibre.

Least material

EPS

Expanded polystyrene, around 98% air. It's a plastic and we won't pretend otherwise, but very little material goes into it, and it's the most affordable of the three. It isn't vapour-open, so it's not the right choice for most old solid walls.

We'll recommend the one that suits your walls and your budget. On many Devon homes more than one would do the job well. On an old solid-walled cottage, how the wall manages moisture matters more than anything else on this page.

Environmental questions about EWI

Photo: wood fibre insulation boards fixed across the back of a house
How much CO2 does external wall insulation save?

It depends on the size of the house, how it's heated and how well insulated it is now. The Energy Saving Trust publishes typical savings by house type, and the biggest savings are usually on larger, older homes with uninsulated solid walls. We can talk you through what's realistic for yours at the survey.

Is EPS insulation environmentally friendly?

EPS is a plastic, so it isn't the greenest material to make. It's around 98% air, though, so very little material goes into it, and it's often the most affordable way to cut heat loss on modern brick and block. On older walls that need to manage moisture, we'd usually recommend wood fibre or mineral wool instead.

What's the greenest insulation for an old stone cottage?

Usually wood fibre. It's made from wood, so it stores carbon, and it's vapour-open, which suits stone and cob walls that need to dry out. It's finished with a compatible breathable render.

Does external wall insulation help with damp and mould?

It can help. Warmer walls are less likely to get condensation and mould on the inside, and a new render keeps rain out. It won't fix an existing damp problem on its own, so leaks, ground levels and ventilation need sorting first, and older walls need a system that can manage moisture.

How long does external wall insulation last?

A properly installed system is designed to last for decades with basic upkeep, like keeping gutters and downpipes clear. A 10-year Baumit warranty is available on qualifying approved systems, subject to registration and terms.

Do I need planning permission for external wall insulation?

Often not, but it depends on the house and where it is. Listed buildings, conservation areas and some changes to how a house looks can need permission, so check with your local council before work starts. We'll flag it at the survey if it's likely to apply.

Free quote

Tell us about
your walls

A name, a number and a rough idea of the job is plenty. We'll come out, have a proper look and give you a written quote.

We work across Devon, from Barnstaple and Bideford to Exeter and Plymouth, and over the border into Cornwall and Somerset. Send a postcode and we'll arrange a time to come and see you.

Rather talk? Ring 07951 779552

Cookie settings

Choose which cookies we can use. You can change this at any time from the "Cookie settings" link at the bottom of every page. More about the cookies we use.

Strictly necessary cookies
Strictly necessaryAlways on

Needed for the site to work, for example remembering your cookie choice. These can't be switched off.

Analytics cookies

Google Analytics tells us which pages are read and how people find the site. It doesn't identify you. Off unless you switch it on.