Rendering timber frame homes in Devon
You can't render straight onto a timber frame. The frame moves and has to manage moisture, so it needs a proper system: a carrier board or wood fibre insulation, often with a drained cavity behind, and a render finish designed to go with it. We fit ProWall, render board and wood fibre systems on new builds and extensions across Devon.
1 in 8
new homes in England are now timber framed
Three systems
ProWall rainscreen, render board or wood fibre
Drained cavity
on rainscreen systems, so any water that gets in has a way out
Thin-coat
lightweight render finishes designed for the system
Timber frame share: Structural Timber Association, 2025.
ProWall and wood fibre systems
Rendering a timber frame house
A timber frame building is held up by a wooden frame rather than solid masonry. Rendering one means fixing a render carrier board or insulation board to the frame, then applying a reinforced base coat and a thin render finish. Put heavy sand and cement straight on and it's likely to crack as the frame moves.
We fit three kinds of system, and the building decides which. ProWall, made in Devon by SAS Europe at Cheriton Bishop, is a rendered rainscreen: its board sits on battens with a ventilated, drained cavity behind, so any water that gets in has a way out. Render board systems give a solid, flat base on extensions and dormers. Wood fibre insulation fixed to the frame adds warmth and stays vapour-open, which suits timber.
We choose the system that suits the frame, and finish each one with the render it's designed for, usually a silicone thin-coat. It's the same kind of finish we use on external wall insulation over masonry.



ProWall, render board or wood fibre
On a lot of jobs the drawings or building control have decided this before we arrive. Where there's a choice, this is how we'd explain it.
| Feature | ProWall rainscreen | Render board | Wood fibre insulation |
|---|---|---|---|
| What it is | Render board on battens with a ventilated, drained cavity behind | Carrier board fixed to the frame to take a render finish | Wood fibre boards fixed to the frame and rendered over |
| Adds insulation | Not really, it's about weather and movement | Not really | Yes, and it's vapour-open |
| Handling moisture | Best of the three, water drains out of the cavity | Relies on the membrane and good detailing | Vapour-open, so the frame can dry outwards |
| Good for | New build timber frame and exposed spots | Extensions, dormers and smaller areas | When you want the frame warmer as well as covered |
| Finish | The render specified for the system, usually a silicone thin-coat |
Got drawings or a spec? Send them over and we'll price the system they call for.
New builds and extensions
Timber frame rendering jobs
Most timber frame work comes from one of three places.
New builds
Self-builds and small developments where the frame is up and a render finish has been specified. We're happy working to a spec and alongside the other trades.
Extensions and dormers
A timber-framed extension or dormer on a masonry house, rendered to match the main walls or to stand apart from them.
Putting it right
Cracked render on a timber frame can have a few causes. We'll look at what's there, find out why, and recommend the right fix, which sometimes means stripping back and fitting a proper system.
How a timber frame job goes
Get us involved early and we can fit in around the rest of the build rather than holding it up.
- Look at the drawingsOr the frame itself if it's already up. We check the spec, the fire requirements and what building control expects.
- Quote in writingSystem, boards, finish and every detail around windows, doors and roof lines.
- Membrane and battensBreather membrane checked or fitted, then battens to form the cavity where the system needs one.
- Boards onCarrier board or wood fibre fixed to the frame, with joints, edges and openings beaded.
- Base coat and meshReinforced base coat across the whole face so the finish has something tough to sit on.
- Render finishThe finish in your chosen colour and texture, then a walk round together before the scaffold comes down.



Timber frame rendering questions

Can you render a timber frame house?
Yes, but not straight onto the frame. Timber frame homes need a render system: a carrier board or wood fibre insulation, often with a drained cavity behind, then a reinforced base coat and a render finish designed for that system.
What is a ProWall rainscreen?
ProWall is a rendered rainscreen system. The render board is fixed to battens on the frame, leaving a ventilated, drained cavity behind it, so any moisture that gets in can drain away and dry out instead of sitting against the timber.
Why does sand and cement render crack on a timber frame?
Sand and cement is heavy and rigid, and a timber frame moves slightly as it settles and with the seasons. Applied straight to the frame it's likely to crack. A proper system separates the render from the frame and uses a lighter finish designed to work with it.
Can wood fibre insulation go on a timber frame?
Yes. Wood fibre boards can be fixed to the frame and rendered over, adding insulation while staying vapour-open so the frame can dry outwards. It suits homes where you want the walls warmer as well as weatherproofed.
Do you work for builders and self-builders?
Yes. We work for homeowners, self-builders and builders, and we're happy working to drawings and a spec alongside the other trades. Get in touch early and we'll fit in around your programme.
