Skip to content

Sand and cement house rendering in Devon

Sand and cement is the traditional render for brick and block. It's applied by hand in two or three coats, straight onto the wall, and finished smooth or textured, ready for paint. Got an older stone or cob house? It will probably need lime render instead.

Coat by coat

applied by hand and built up in layers

Brick and block

houses, extensions and re-renders

Smooth or textured

finished ready for paint

Free survey

we check the wall before we recommend anything

Brick and block walls

What sand and cement render is, and where it goes

Traditional render is a coating applied by hand in two or three coats, straight onto the wall, to weatherproof it and give it a smooth or textured finish. The two main types are sand and cement, which suits modern brick and blockwork, and lime, which suits older solid walls that need to manage moisture.

Sand and cement is strong, hard-wearing and the usual choice for post-war brick and block houses, extensions and garden walls. It's finished smooth or textured, and it's normally painted.

Older stone, cob and solid walls are a different story. Hard cement can trap moisture in them, so they usually need a vapour-open lime render instead.

Monocouche and silicone finishes have their own pages: monocouche render and silicone render. Want to insulate the walls at the same time? Have a look at external wall insulation.

Sand and cement, lime or monocouche

Each one does a good job on the right wall. The difference is mostly about what the wall is made of and how it handles moisture.

FeatureSand and cementTraditional limeMonocouche
SuitsModern brick and blockwork, extensionsCob, stone and older solid wallsBrick and blockwork, new builds
How it goes onTwo or three coats, by handSeveral coats, by handOne coat, usually by machine
MoistureHard and dense, so moisture in the wall is slow to escapeVapour-open, lets the wall dry outNot for walls that need to stay vapour-open
FinishSmooth or textured, usually paintedSmooth or textured, often limewashedThrough-coloured, no initial painting required

Not sure what your walls are? Send us a photo and we'll have a good idea before we visit.

Pebbledash and extensions

House rendering jobs we take on

Most of our sand and cement work is one of these.

Re-rendering

Tired, cracked or blown render taken back to the brick or block and done again properly. If only part of it has gone, see render repairs.

New extensions

Fresh blockwork rendered to match the house, or finished to stand apart from it.

Over pebbledash

Often possible once we've checked it's sound. If it sounds hollow or is coming away, it comes off first.

Older house?

Stone, cob and older solid walls need a render that lets them dry out. See lime rendering, including taking hard cement off and putting lime back.

How we render a house

Render needs dry, frost-free days to cure properly, so we plan around the weather and give you a realistic timescale.

  1. Survey and quoteWe check the wall, make sure sand and cement is right for it, and put it all in writing.
  2. Scaffold and protectionScaffold up, windows, doors and paths covered before anything gets mixed.
  3. PrepOld or loose render hacked off, surfaces cleaned, and a check for damp or cracks that need sorting first.
  4. Beads and base coatCorner, stop and bellcast beads fixed, then the scratch and float coats built up.
  5. Finish coatFloated smooth or textured, ready for paint.
  6. Curing and clean-upEach coat given time to cure, then the site cleared and a walk round together.

House rendering questions

Bungalow and garage rendered in white sand and cement
What is the difference between sand and cement and lime render?

Sand and cement is hard and dense, and suits modern brick and blockwork. Lime render is softer and vapour-open, so moisture can leave the wall, which is why it suits cob, stone and older solid walls. We'll recommend the one your walls need after looking at them.

Can you render over pebbledash?

Often, yes, as long as the pebbledash is sound and well stuck to the wall. We tap it over first. If it sounds hollow or is coming away, it comes off before any new render goes on. If it needs to come off, we hack it back to the brick or block and re-render from scratch.

Can you render an old stone or cob house in sand and cement?

We wouldn't. Old solid walls were built to take in and release moisture, and hard cement render can trap it in the wall, which can lead to damp inside and decay behind the render. Those walls need a vapour-open lime render instead.

Does sand and cement render need painting?

Usually, yes. Sand and cement is normally finished with a masonry paint, then repainted over time. If you'd rather not paint, a through-coloured monocouche or silicone render is an option, and no initial painting is required.

How long does it take to render a house?

It depends on the size of the house, how much prep it needs and the weather. Each coat needs time to cure before the next goes on. We'll give you a realistic timescale on the quote.

How much does it cost to render a house?

It depends on the size of the house, access and scaffolding, how much old render or pebbledash has to come off, and the finish you want. We'll come out, look at the walls and give you a written quote, so you know exactly what's included.

Free quote

Tell us about
your walls

A name, a number and a rough idea of the job is plenty. We'll come out, have a proper look and give you a written quote.

We work across Devon, from Barnstaple and Bideford to Exeter and Plymouth, and over the border into Cornwall and Somerset. Send a postcode and we'll arrange a time to come and see you.

Rather talk? Ring 07951 779552

Cookie settings

Choose which cookies we can use. You can change this at any time from the "Cookie settings" link at the bottom of every page. More about the cookies we use.

Strictly necessary cookies
Strictly necessaryAlways on

Needed for the site to work, for example remembering your cookie choice. These can't be switched off.

Analytics cookies

Google Analytics tells us which pages are read and how people find the site. It doesn't identify you. Off unless you switch it on.