Spray cork render in Devon
Sprayed cork is a flexible, textured coating made mostly from natural cork. It's sprayed onto the wall in thin coats, goes over most sound walls and render, and gives a water-repellent finish that moves with the building. We offer it as a finish on homes across Devon.
Natural cork
sprayed on in thin coats
Flexible
flexes with small movement in the wall
Goes over
most sound walls, render and lime
Not EWI
can improve thermal performance, but it isn't a board system
Flexible wall coating
What spray cork is, and what it does
Spray cork is a decorative and protective coating, sprayed in layers to build a finish a few millimetres thick. It's breathable and flexible, it copes better than a hard render with small movements in the wall, and it gives a soft, lightly textured look that suits modern houses and old cottages alike.
It can go over almost any sound surface: existing render, brick, block, stone, and the lime systems on our lime rendering page. That's why it's a finish that sits across several of our services rather than a service of its own.
Now the honest bit. Spray cork is sometimes sold as insulation. A thin cork coating can improve thermal performance a little, but it isn't a substitute for an insulation board system. If cutting heat loss is the goal, that's external wall insulation, finished in silicone.
A coating can't fix a failing wall either. If the render underneath is cracked or blown, it needs render repairs first, or the cork comes away with it.
Spray cork, silicone render or insulation
People often ask for cork when what they actually want is one of these. Here's how they compare.
| Feature | Spray cork | Silicone render | External wall insulation |
|---|---|---|---|
| What it is | A sprayed cork coating, a few millimetres thick | A thin-coat render over a base coat and mesh | Insulation boards fixed to the wall, then rendered |
| Goes over | Most sound walls, render and lime | Masonry, insulation and render board | Solid walls, with a render finish on top |
| Warmer walls | Can improve thermal performance; not a substitute for a board system | No | Yes, this is what it's for |
| Movement | Flexible, covers hairline cracks | Slightly flexible | Rigid board, flexible finish |
| Finish | Textured, in a range of colours | Fine textured grain | Usually a silicone thin-coat |
Want warmer walls? Tell us that at the survey and we'll price insulation as well, so you can compare.
Where spray cork earns its place
Cork earns its place on four kinds of job.
Over tired render
Sound render that's cracked, patched or just tired, given a new flexible skin without taking it all off.
On lime and older walls
A vapour-open topcoat on lime render, where a sealed paint would do harm.
Exposed walls
Walls that take a lot of weather, where a flexible, water-repellent coating earns its keep.
A change of colour
A textured finish in a new colour, without stripping the render underneath.
How spray cork is applied
Cork goes on in thin coats that each need time to firm up, so we plan around dry weather and give you a realistic timescale.
- Survey and quoteWe check what's on the wall now, make sure cork is the right call, and put it all in writing.
- Scaffold and protectionScaffold up where it's needed, then everything masked: windows, doors, paths and planting.
- PrepThe wall washed down, loose material off and cracks filled, with a primer where the surface needs it.
- Spray coatsSeveral thin coats sprayed on and built up to an even texture.
- Check the finishEdges tidied and the texture checked once it's firm.
- Unmask and clean upMasking off, the site cleared and a walk round together.
Spray cork questions

What is spray cork?
Spray cork is a coating made mostly from granulated natural cork and water-based binders, sprayed onto the wall in thin coats. It builds up into a flexible, textured, water-repellent finish that goes over most sound walls and render.
Is spray cork insulation?
Not in the way an insulation board system is. A thin cork coating can improve thermal performance, but it shouldn't be presented as equivalent to a conventional external wall insulation board system. The benefit depends on the product, the thickness and the wall. If warmer walls are the main aim, external wall insulation is the job to look at.
What can spray cork go over?
Most sound surfaces: existing render, masonry, blockwork and lime render. The wall needs to be clean and firmly stuck together first, so anything loose comes off before we spray.
Does spray cork need painting?
No. The colour is in the coating, so there's no initial painting. It comes in a range of colours, and we'll go through them with you at the survey.
Is spray cork any good for old houses?
It can be a good fit, because it's vapour-open and flexible. On cob, stone and older solid walls it works as a topcoat over lime render, where a sealed masonry paint would trap moisture. We'll look at the wall first and say if it suits.
How much does spray cork cost?
It depends on the size and state of the walls, how much masking and prep is needed, and the number of coats. We'll give you a written quote after the survey, and we'll price silicone render or insulation alongside it if either would suit you better.
