External wall insulation in Devon
External wall insulation wraps the outside of your house in insulation boards, then seals them under a reinforced base coat and a render finish. We fit Baumit systems on solid-walled homes right across Devon, with a 10-year Baumit warranty available on qualifying systems.
Around a third
of heat lost from an uninsulated home escapes through the walls
Three systems
EPS, mineral wool or wood fibre, matched to your walls
No floor space lost
it all goes on the outside, so every room stays the same size
10 years
Baumit warranty available on qualifying systems
Heat loss figure from the Energy Saving Trust. Warranty subject to Baumit registration and terms.
Solid wall insulation
What EWI actually does for a house
External wall insulation, or EWI, is a layer of insulation fixed to the outside of your walls and rendered over. It cuts the heat soaking out through solid brick, block or stone, and gives the house a brand new weatherproof face at the same time.
Most houses built before the 1920s have solid walls with no cavity to fill, which is exactly who EWI is for. Heat loss through a solid wall is something you feel in the corners of rooms and see on the bills.
We finish our EWI installations with the render specified for the approved system, usually a silicone thin-coat finish. You can't simply put ordinary sand and cement or monocouche over the boards, because the system is designed and tested as a whole. If a quote offers a finish that isn't part of the system, it's worth asking why. Traditional renders on bare brick and block are covered on our traditional rendering page.
Timber-framed house? That needs a different build-up, so it has its own page on timber frame rendering. And if you want the numbers on bills and carbon, we've put them together on our page about the eco benefits of external wall insulation.



EPS, mineral wool or wood fibre
Choosing the right insulation board
There's no single best insulation, only the right one for your walls, your budget and how your house needs to manage moisture. We fit all three, so there's no reason to push you towards any of them.
| Feature | EPS | Mineral wool | Wood fibre |
|---|---|---|---|
| Warmth per pound | Best value of the three | Good, costs a little more | Good, dearest of the three |
| Moisture | Not vapour-open, wrong for most old solid walls | Vapour-open, copes with mixed wall build-ups | Vapour-open, pairs well with a breathable finish |
| Fire performance | Relies on the system's fire detailing | Non-combustible, the best of the three | Combustible, relies on the system's fire detailing |
| Best suited to | Post-war brick and block, bungalows | Terraces, mixed walls, where fire rating matters | Stone, cob and period properties |
| Worth knowing | The workhorse on most modern homes | Heavier slabs, a little slower to fit | The right money on older walls |
The finish: all three are finished with the render the system specifies, most often a through-coloured silicone. It's water-repellent and resists dirt build-up, and because the colour runs all the way through, no initial painting is needed.
One thing we'll always say: EPS on an old stone or cob wall can cause damp problems that cost far more to put right than the saving was worth. If your walls need a vapour-open system, we'll tell you at the survey.
How external wall insulation is installed
- SurveyWe look at the walls, measure up, check for damp and talk through boards and colours. Free, with no obligation.
- Written quoteSystem, board, finish and scaffold, plus how we'll handle windows, pipes, meters and anything fixed to the wall.
- Scaffold and prepScaffold up, walls cleaned, loose render taken off, downpipes and fittings removed.
- Boards onStarter track at the base, boards bonded and fixed, corners and window reveals detailed properly.
- Base coat and meshReinforced base coat trowelled on with mesh bedded in, then primed ready for the finish.
- Finish and sign-offRender finish in your chosen colour, fittings back on, a walk round together and warranty registration where it applies.



External wall insulation questions

What is external wall insulation?
External wall insulation is a layer of insulation boards fixed to the outside of your walls, then covered with a reinforced base coat and a render finish. It cuts the heat lost through solid walls and gives the house a new weatherproof face.
What render goes on top of external wall insulation?
We finish our EWI installations with the render specified for the approved system, usually a silicone thin-coat finish. Ordinary sand and cement or monocouche can't simply be swapped in, because the insulation, base coat, mesh and finish are designed and warranted as one system.
Can external wall insulation cause damp?
It shouldn't, when it's properly designed and detailed. The right system for the wall, careful detailing around windows, rooflines and ground level, and fixing any existing damp first all matter. On older stone or cob walls we'll usually recommend a vapour-open system such as wood fibre.
Can you fit external wall insulation to a stone cottage?
Often, yes, but it needs the right system. Stone and cob walls have to manage moisture, so we usually recommend wood fibre with a compatible breathable finish rather than EPS. We'll look at the wall first and tell you if EWI isn't the right call.
How much does external wall insulation cost?
It depends on the size of the house, the insulation and the detailing, and wood fibre systems usually cost more. Every job is quoted in writing after a survey, so you know exactly what's included.
What warranty comes with external wall insulation?
A 10-year Baumit warranty is available on qualifying approved systems, subject to registration and Baumit's terms. We'll confirm exactly what cover applies to your job on the quote.