Skip to content

Internal plastering and skimming in Devon

Plastering is where we started, and we still do it. We skim walls and ceilings with a two-coat finish over tired plaster, patched walls and new plasterboard, and leave them smooth and ready to decorate.

2 coats

skimmed on and trowelled smooth

Walls and ceilings

tired plaster, patched walls and new board

Sheeted up

floors and furniture protected before we start

Free quote

we see the room before we price it

Plasterers in North Devon

What skimming is

Skimming is a thin finishing plaster, applied in two coats and trowelled smooth, that gives walls and ceilings a flat, clean surface ready for paint. It's the usual answer for tired or patched plaster and new plasterboard.

Most of the job is preparation. We sheet the room up, fill minor cracks, and seal the surface with PVA or a bonding primer so the new plaster grips and doesn't dry too fast. Then two coats go on and get trowelled up to a smooth finish.

Textured ceilings like Artex need checking before anything else. Older textured coatings can contain asbestos, so we'll recommend having a sample tested first. If it's clear, we seal and skim over it. If it isn't, we'll talk you through the safe options before anything is disturbed.

We use British Gypsum plasters. And if it's the outside walls that need attention, that's our render repairs and rendering work.

Skim, patch or replaster

Not every tired wall needs a full skim, and not every wall can take one. Here's how the options compare.

FeatureSkimPatch repairFull replaster
What it isTwo thin finishing coats over a sound surfaceFilling and resurfacing a damaged areaOld plaster hacked off and the wall plastered again
Right whenThe surface is sound but tired, patched or texturedThe damage is small and the rest is finePlaster is blown, crumbling or coming off
DisruptionOne room at a timeMinimalThe most, and plenty of dust
FinishSmooth all overCan show through paintSmooth all over

Not sure what your walls need? Send us a photo and we'll give you a good idea.

Skimming over Artex

Plastering walls, ceilings and boards

Plastering is where the business started, and it's a big part of why our rendering outside is as tidy as it is.

Tired walls

Walls covered in old filler, cracks and years of patching, skimmed back to one flat finish.

Textured ceilings

Checked first, as older coatings can contain asbestos. Once they're clear, sealed and skimmed to a smooth, modern ceiling.

New plasterboard

Taped and skimmed after a renovation, an extension or a new stud wall, and drylined walls brought up to a proper finish.

How a skimming job goes

  1. Look and quoteWe see the room, check what's on the walls and ceiling, and put a price in writing.
  2. Book inA date that suits you, with a rough idea of how long we'll be there.
  3. Sheet upFloors, furniture and fittings covered, sockets and switches loosened where needed.
  4. Prep and sealCracks filled, loose material off, and the surface sealed so the skim grips.
  5. Two coatsApplied and trowelled up to a smooth, flat finish.
  6. Tidy upRoom cleared and swept, with advice on drying and your first mist coat.

Skimming and plastering questions

Freshly skimmed dormer ceiling drying to an even pink
What is skimming?

Skimming is a thin finishing plaster, applied in two coats and trowelled smooth over an existing wall or ceiling. It gives a flat, clean surface ready for decorating, without the cost and mess of a full replaster.

Can you skim over Artex?

Often, yes, but it needs checking first. Older textured coatings can contain asbestos, so we'll recommend having a sample tested before any work starts. If it's clear, we seal it and skim over it. If it isn't, the right approach depends on its condition, and we'll talk you through the options before anything is disturbed.

How long does fresh plaster take to dry?

Usually a few days to a week for a skim, and longer for a full replaster, depending on the room, the heating and the ventilation. It's ready when it has turned an even, light colour all over. Give it a mist coat before your first proper coat of paint.

Can you skim over old plaster?

Yes, if it's sound and well stuck to the wall. Loose or blown areas are cut out and made good first. If large areas are coming away, a full replaster is usually the better option.

How much does it cost to skim a room?

It depends on the size of the room, the condition of the walls and ceiling, and how much preparation is needed. We'll look at the room and give you a written quote before any work is booked, and tell you whether it needs a skim or a full replaster.

Free quote

Tell us about
your walls

A name, a number and a rough idea of the job is plenty. We'll come out, have a proper look and give you a written quote.

We work across Devon, from Barnstaple and Bideford to Exeter and Plymouth, and over the border into Cornwall and Somerset. Send a postcode and we'll arrange a time to come and see you.

Rather talk? Ring 07951 779552

Cookie settings

Choose which cookies we can use. You can change this at any time from the "Cookie settings" link at the bottom of every page. More about the cookies we use.

Strictly necessary cookies
Strictly necessaryAlways on

Needed for the site to work, for example remembering your cookie choice. These can't be switched off.

Analytics cookies

Google Analytics tells us which pages are read and how people find the site. It doesn't identify you. Off unless you switch it on.