Garden wall restoration and monocouche rendering in Bishop’s Tawton
Restoration and rendering of approximately 50m² of garden boundary walls in Bishop’s Tawton, Devon. Completed in eight days, combining blockwork repairs with Ecorend monocouche in Scotch Stone to transform a weathered boundary into a smart garden feature.
Bishop’s Tawton, North Devon
About this job
The building
Garden boundary walls with exposed blockwork, projecting piers and sections of older masonry. The existing walls had a rough, weathered and inconsistent appearance, with repairs needed before rendering.
What we did
We repaired and restored the affected blockwork, then prepared the walls for Ecorend monocouche render in Scotch Stone.
The work covered approximately 50m², including the garden-facing walls, outer face, piers and stepped sections. Careful finishing around the projecting piers and changes in height gave the boundary clean edges and a consistent appearance.
The work took approximately eight days.
The finish
The transformation brought a much brighter, more finished feel to the garden. The Scotch Stone render replaced the exposed blockwork with a consistent textured surface, while neatly defined piers retained the wall’s character.
Later photographs show how the rendered walls complement the timber screening, planting and seating areas, providing a coordinated backdrop to the completed garden.
More of our work
Bude, CornwallApartment building re-rendering and water-damage repairs in BudeFull re-rendering of approximately 400m² on an apartment building in Bude, Cornwall. The project included investigation of water damage, extensive wood fibre insulation repairs and timber-frame restoration, finished with 1.5mm Baumit StarTop in colour 0867.
Umberleigh, North DevonSilicone rendering to a timber-frame property in UmberleighA fully mesh-reinforced Baumit thin-coat render system applied to approximately 50m² of render board. Completed in one week with a fine 1.5mm silicone finish in Cotton White.
Totnes, DevonWood fibre insulation and render system replacement in TotnesA Baumit warranty remedial project to replace approximately 52m² of failed external wall insulation and render. The existing system was removed and replaced with 100mm wood fibre insulation, finished with 1.5mm Baumit StarTop in colour 0189.





